DIY Christmas Stocking

“Christmas is perfect around the corner and that means we’re getting a head start on spreading the cheer with this Do It Yourself stocking tutorial.”

It’s that time once again! Christmas is perfect around the corner and that implies we’re getting a head start on spreading the cheer with this DIY stocking tutorial. Have fun customizing it with the material of your option to make it the best addition to your holiday decoration. You will need:1 fat quarter 18in x 22in/ 46cm x 56cm Christmas fabric for outer layer

  • 1 fat quarter 18in x 22in/ 46cm x 56cm strong fabric for lining
  • 1 fat quarter 18in x 22in/ 46cm x 56cm collaborating accent fabric for cuffs, heel and toe (if piecing external)
  • Quilt batting or fusible fleece 18in x 22in/ 46cm x 56cm
  • Thread and button to match your material
  • 6in/ 15cm ribbon to make a hanging loop
  • Wunderlabel woven or custom iron on label
  • On a large piece of paper or cardstock, draw out your equipping. Our finished measurements are 11″ x 16″ (28cm x 40cm). You can also find a free PDF downloadable pattern online to use if you wish. We pieced the external layer to consist of a heel and toe area by tracing around the primary area and cutting off a curved heel section and a straight toe area. Include 1/4 in/ 0.75 cm seam allowance to each piece where you cut the pattern apart. If you would rather not piece the external equipping (the heel and toe pieces), then simply use your pattern as-is. Use a 1/4 in/ 0.75 cm joint allowance for all joints unless otherwise specified.Cut your fabric

    as follows: Christmas material– 2 mirror images of main equipping piece Lining fabric– 2 mirror images of primary equipping piece

  • Accent material– 4 cuffs (the narrower part of the cuff will be the
  • top, if your fabric is directional ), 2 mirror images of heel accent piece, 2 mirror images of toe accent piece Batting/fusible fleece– 2 mirror images of main stocking piece, 2 cuffs Stitch the narrower part of the cuff onto the top of each inner and outer equipping right sides together. Press

    the seams to one side.< img alt= "Do It Yourself Christmas Stocking"width=" 675"height="333 "src= "https://cms.wunderlabel.com/Blog/2017/Tutorials/christmas_stocking/chaussette2.jpg"/ > If utilizing a label, centre it on a lining piece about 1in/ 2.5 cm below the cuff seam. Sew together close to the edge of the woven label. Stitch the heel and toe accent pieces on. The toe is easy since it’s a straight line seam, but you will need to pin/clip the heel piece on at the edges and in the middle, then keep the raw edges lined up as you stitch

    along the curve. Press the seam allowances towards the primary fabric. Pin the batting onto the incorrect side of the outer stockings and baste together near to the raw edges

    DIY Christmas Stocking

    , or fuse together if utilizing fusible fleece. You could likewise include batting/fleece to the cuff if desired. Pin/clip the external stockings best sides together, matching all joints and sew together. Do not sew throughout the top of the equipping! Clip the curves so that they lie flat when the equipping is the proper way out. Repeat for the linings. You don’t need to clip the curves here, but don’t forget to leave a 4in/ 10cm space for turning. Backstitch at either side of the turning hole and press the seam allowance open up to make it easier to stitch closed in the future. Turn the external equipping properly out and position it inside the lining, best sides together and making certain the toes are pointing in the exact same direction. Line up the raw edges around the cuff and pin/clip them together, matching the side seams. Stitch.

    DIY Christmas Stocking

    DIY Christmas Stocking

    Turn the stocking properly out through the turning hole you left earlier. You can either sew it nearby hand utilizing a ladder sew or merely pin/clip the edges together and stitch near the edge with your sewing machine.

    DIY Christmas Stocking

    DIY Christmas Stocking

    Tuck the lining inside the outer stocking and press, then fold the cuff down and press again. Stitch the ribbon and button

    on to the leading left corner of your stocking, through the cuff and the primary part of the stocking. Ensure your stitches are strong so that they do not break when Santa fills the stocking!

    DIY Christmas Stocking

    DIY Christmas Stocking

    Do You want to save this idea for later? Just bookmark the link to this blog post or add it to your “Favourites” so that you can quickly discover it in your internet browser later.Here is how to save the tutorial: On your computer:

    • Click on the asterisk or the three dots in the top right-hand man corner or on the book icon in the top left hand corner (depending on the web browser you use). On your Android mobile phone: Click on the 3 dots in the top right hand corner and then on the asterisk.On your iPhone: Click the book icon at the bottom and
    • include the link to your bookmarks or book list.

    Christmas Stockings

    Christmas Pullovers

    Christmas Pullovers

    Christmas Dresses

    Christmas Dresses

    Christmas Jewelry