To begin print and cut out the patterns. You will need to choose external material and a lining material for each design of equipping. I discover it easier to trace the pattern on the material with it pinned together and then cut it out through two layers. To make the paw cuff fold down a few inches at the top of the pattern. Step the size of the folded part and cut 2 rectangular shapes from a coordinating material including 1/4″ joint allowance. Cut two of the lining pieces. Cut one piece of the fusible fleece.To make the
paw pads adhere the Heat n Bond to the incorrect side of an appropriate size piece of collaborating material. Trace the shapes and cut out of the fabric. Place the pattern under the material front to assist with correct alignment and press in place. Sew the cuff to the front and back outer pieces utilizing a 1/4″ seam.